Parent: Wifi Wireless Cards Supported | Discuss this page

Model | Chipset | Driver | Works 'out of the box' | Comments | Last Updated |
WMP54G (Ver 1.0/2.0) | Broadcom BCM4306 | bcm43xx/b43 | No | Can be setup easily under Intrepid 8.10, by first connecting to the internet (using a wired connection) and clicking System > Administration > Hardware Drivers, then activate the Broadcom B43 Wireless driver. | 2008-08-09 |
WMP54G (Ver 3.0) | Broadcom BCM4306 | wl or ndiswrapper | No | Works with wl (may be flaky), but not b43. Also works with ndiswrapper. | 2008-08-09 |
WMP54G (Ver 4.0) | Ralink RT2500 | rt2500pci | Yes | Detected in Network Settings as ra0 and started working after WAP details were input. | 2005-10-17 |
WMP54G (Ver 4.1) | Ralink RT61 | rt61pci | Yes | Works great out of the box in ubuntu 8.10. | 2009-07-05 |
WMP54G (Ver 4.5) | BCM4318 [AirForce One 54g] | fwcutter | No | Does not work in Hardy. | 2008-07-5 |
WMP54G (Ver 4.51) | Ralink RT61 | rt61 Yes | In partedmagic 2.6.35-7 kernel. | 2010-12-26 | |
WMP55AG | Atheros | madwifi | Yes | Detected in Network Settings as ath0 and started working after WPA was configured. | 2007-02-05 | |
WMP300N | BCM43XG | wl | No | After installing the card, I had to enable 'Broadcom STA wireless driver' in the hardware drivers manager. After rebooting, I selected the network icon in the upper panel by right clicking. I was asked to select the network to use (SSID) and the WEP password. This card is version 1. Using Jaunty 9.04. | 2009-10-12 |
WMP600N | Ralink | rt2860 | Yes | In 9.10 it works. | 2009-11-21 |
Downloadable user guides for Linksys network adapters Setup & Installation Encountering problems when installing or updating the wireless adapter drivers on a Windows® XP computer. The package provides the installation files for Linksys Home Wireless-G USB Adaptor Driver version 3.0.2.0. If the driver is already installed on your system, updating (overwrite-installing) may fix various issues, add new functions, or just upgrade to the available version. Linksys network card drivers. Install drivers automatically. Are you tired of looking for drivers? DriverPack will automatically select and install the required drivers. Popular Linksys network cards. Realtek PCI GBE Family Controller. Linksys EG1032 v3 Instant Gigabit Desktop Network Adapter Driver.
Version | Chipset | Driver | Supports network install? | Supported in installed system? | Works 'out of the box' | Comments | Last Updated |
WPC 11 (Ver.2.5) | ? | orinoco_cs | No | Run 'cardctl ident' and add info to /etc/pcmcia/config under wireless network adapters section. Be sure to include manfid and bind to orinoco_cs. Then just reboot and run 'gksudo network-admin' in console and configure eth0. | |||
WPC 11 (Ver.3) | Prism/Intersil | ? | Yes | Detected in Network Settings as eth0 and started working after WAP details were input. | 2005-08-15 | ||
WPC 11 (Ver.4) | Realtek RTL8180L | rtl8180 | Yes | Tested on Ubuntu 7.10 kernel version 2.6.22-14-generic. Card was detected and needed only to be set up in network-manager. 'Link' light non-operable, but link established at 11 Mb/s. | 2007-10-14 | ||
WPC54AG | AR5212 802.11abg NIC (rev 01) | madwifi | Yes | Ran apt-get update and card was found. Using WPA-PSK with distro's madwifi drivers connecting to Dlink di-624 version 3. | 2006-09-19 | ||
WPC54G (ver 1.2) | Broadcom (BCM4306 rev3) | ? | No | Get recognized in the setup process, but unable to use it. After setup completes, the card is shown in the network interfaces (as eth0, all hardware details are shown too), but the system is unable to activate it. Updating the firmware (link broken) fixes the problem. To do this when Ubuntu starts, open the restricted drivers management and enable bcm43xx. | 2006-03-14 | ||
WPC54G (Ver.2) | Texas Instruments ACX111 | acx | No | In Fiesty, it works, but not with WPA. WPA works with ndiswrapper according to this howto: Ndiswrapper. | 2008-04-02 | ||
WPC54G (Ver 3 | Broadcom | ndiswrapper | No | Couldn't get any of the windows drivers from linksys.com to work (they don't have a version 3 one listed right now) but I tried the driver off the installation CD with ndiswrapper and it worked. Built in driver works flawlessly with the 2.6.15 kernel. In Feisty installing Broadcom firmware here will get v.3 cards working. | 2006-07-05 | ||
(Ver 3.2?) | Broadcom (BCM43??) | ? | No | Hardware recognized immediately upon startup. Clicking through warnings re: closed-source/proprietary hardware should bring you options to download firmware updates. Following downloads and install, you should be up and running (note: you may also need to manually configure the network - enter SSID, WEP, DHCP setup or not, etc.) | 2008-05-18 | ||
WPC54G (Ver.4) | INPROCOMM IPN 2220 | ndiswrapper | No | This card type is very tricky to get working, must have drivers for the SPECIFIC version of the card. | 2005-12-27 | ||
WPC54G (Ver 7.1) | Atheros | madwifi | Yes | It just works (Dapper Drake 6.06). | 28-09-2006 | ||
WPC54GS-UK | Broadcom (BCM4318) | ? | No | See here. Card works well once the Broadcom firmware is installed WifiDocs/Driver/bcm43xx. | 2006-11-07 | |||
WPC300N Ver.2 | Atheros | ? | Yes | In Ubuntu 10.04 The card works out of the box with the standard GNOME network manager. | 2010-04-29 |
Chipset | Driver | Supports network install? | Supported in installed system? | Works 'out of the box' | Comments | Last Updated |
WUSB600N Ver. 1 | Ralink RT2870 | rt2870usb | No | version1: Needed to modify the Ralink driver or simply use the modified-for-you version available at this post: http://ubuntuforums.org/showthread.php?t=972060 . Following the instructions at that post enabled the adapter and it works perfectly. Basically the problem is although the adapter uses the RT2870 chipset, the Ralink drivers don't know it yet, so you have to add the name of the adapter and change a few variables to support WPA (the original Ralink driver's README gives instructions on the WPA stuff). The pre-configured driver package in that post has done this already. | 30 Nov 2009 | |
WUSB600N Ver. 2 | Ralink RT2870 | rt2870usb | No | Requires latest Ralink RT3572 source drivers, modification instructions can be found here. | 30 Nov 2009 | |
WPC54GS | Broadcom (BCM4306 rev3) | ndiswrapper | No | Card works well with windows driver (from CD) & ndiswrapper - the instructions here were simple and effective. | 2006-03-16 | |
WUSB11 (Ver.2.6) | ? | ? | Yes | Just plug in, choose wireless network in networking, and it works in Ubuntu 9.04. | 2009-10-02 | |
WUSB11 (Ver.2.6) | ? | ? | No | Doesn't work in 10.04. | 2010-10-24 | |
WUSB11 (Ver.2.8) | ? | ? | Yes | Just choose wireless network in networking, and works. Xubuntu 6.06. | 2009-07-15 | |
WUSB11B (Ver.2) | ? | Yes | Tested on Dapper Beta 2. | 2006-05-09 | ||
WUSB300N (Ver.2) | ? | ndiswrapper | No | ndiswrapper needed plus command line hack. | 2009-12-20 | |
WUSB54G (Ver.4) | Ralink | rt2500 / rt2570 | Yes | Works 'out of the box' in Karmic. One may use ndiswrapper with the Windows driver from linksys but not the version for Vista. Use ndiswrapper 1.9 to install driver then used > System > Administration > Network to configured this wireless device. | 2010-03-13 | |
WUSB54GC | Ralink RT2571W/RT2671 | Yes | Works with Hardy. | 2008-06-01 | ||
WUSB54GC | rt73usb | rt73usb | Yes | Works with Intrepid. | 2008-11-04 | |
WUSB54GC Ver. 3 | ralink 2070 1737:0077 | ? | No | Works fine with Lucid once you blacklist rt2870STA module. | 16-05-2010 | |
WUSB54GC-EU Ver. 2 | 1737:0073 | ? | No | Is not detected by Jaunty. The Windows driver shows that it has the RTL8187B chipset. | 25-05-2009 | |
WUSB54GP | 13b1:0011 | rt2500 | No | Followed instructions here. | 2008-07-24 | |
AE2500 | Broadcom BCM43236 | ndiswrapper | No | On 64 bit system, native support with brcmfmac for this chipset did not work. Using ndiswrapper, could not load .inf file from the XP driver without adding some entries, and even then at a moderate distance from the router the connection was dropped so frequently as to be unusable; could not register an IP address. | 5 May 2012 |
CategoryHardwareCategoryWirelessCategoryWirelessCategoryWireless
Linksys Wifi Card
- Delivers AC speeds of up to N300 + AC867 Mbps and features Gigabit ports for a supercharged wired connection and USB 3.0.
- April 17, 2017
- Windows (all)
- 14.4 MB
- The Max-Stream AC2600 Router is the ultimate solution for multi-device households. Breakthrough MU-MIMO technology delivers 4.6x* faster Wi-Fi speeds to everyone and everything on your busy network. Now the whole household can play video games, listen to music, check email, shop, stream movies, and more--all simultaneously and without lag or buffering.
- March 2, 2016
- Windows (all)
- 20.0 MB
- A WRE54G expands your network coverage into hard-to-reach areas. The installation of range expander saves wiring cost since this is doesn’t require an Ethernet cable after the successful installation.
- February 25, 2016
- Windows (all)
- 2.8 MB
- Setup Wizard for your Linksys WAP54G - Wireless-G Access Point.
- October 12, 2015
- Windows (all)
- 46.5 MB
- July 21, 2010
- Windows (all)
- 74.7 MB
- September 13, 2010
- Windows (all)
- 7.6 MB
- October 19, 2010
- Windows XP/Vista/7
- 398 KB
- With more smart devices entering the home, consumers need Wi-Fi that is powerful, easy to use and can maximize their connected experiences.
- January 7, 2014
- Windows (all)
- 13.1 MB
- January 19, 2007
- Windows Vista
- 178 KB
- The latest Linksys WMP54G Wireless-G PCI Adapter Driver for Windows XP offers a new version for the Setup Wizard and fixes issues with reconnect after existing standby and hibernate on PC.
- November 17, 2005
- Windows XP
- 6.0 MB
- January 10, 2013
- Windows (all)
- 3.2 MB
- February 24, 2012
- Windows XP/Vista/7
- 3.2 MB
- April 16, 2009
- Windows (all)
- 486 KB
- With more smart devices entering the home, consumers need Wi-Fi that is powerful, easy to use and can maximize their connected experiences.
- October 18, 2017
- Windows (all)
- 13.1 MB
- The WUSB54GC is a compact wireless-G USB adapter that connects your computer to a wireless network.
- May 7, 2010
- Windows XP/Vista
- 50.5 MB
- Operating system support: Windows 95/98/NT.
- September 1, 1997
- Windows 95/98/NT
- 630 KB
- April 12, 2007
- Windows XP/Vista
- 13.8 MB
- September 13, 2006
- Windows (all)
- 363 KB
- October 7, 2009
- Windows XP/Vista
- 395 KB
- March 1, 2010
- Windows (all)
- 1.7 MB
- Upgrade your Linksys EPS3 - Ethernet PrintServer.
- April 30, 1996
- Windows 95
- 132 KB
- Upgrade your Linksys PASB221 - Reversible Compact AutoSwitch 2-to-1.
- August 7, 1996
- Windows 95
- 435 KB
- Upgrade your Linksys PASB421 - Reversible Compact AutoSwitch 4-to-1.
- August 7, 1996
- Windows 95
- 435 KB
- Upgrade your Linksys DCASR12 - Reversible 1-to-2 Bi-Directional Auto Switch.
- August 11, 1997
- Windows 95
- 723 KB
- Upgrade your Linksys LNEPCI2T - EtherPCI Lan Card II 10BaseT w/ no coax port.
- March 29, 1999
- Windows 95/98
- 604 KB
- Upgrade your EFSP42 - EtherFast Switched 2-Port Print Server.
- March 3, 2000
- Windows 95/98/NT
- 890 KB
- Upgrade your Linksys PCM100 - EtherFast 10/100 Integrated PC Card.
- April 19, 2000
- Windows 95/98/NT
- 520 KB
- Upgrade your Linksys BEFSRU31 - EtherFast® Cable/DSL Router with USB and 3-Port Switch.
- January 9, 2001
- Windows 98/Me/NT/2000
- 32 KB
- Upgrade your Linksys EG0801SK - EtherFast 10/100/1000 8+1 Workgroup Gigabit Switch Starter Kit.
- June 4, 2001
- Windows 98/Me/2000
- 164 KB
- Upgrade your Linksys HPN200 - HomeLink Phoneline 10M Network Card.
- June 14, 2001
- Windows 98/Me/NT/2000
- 1.5 MB
- Upgrade your Linksys USB10T - USB Network Adapter.
- October 1, 2002
- Windows 98/Me/NT/2000
- 181 KB
- Upgrade your Linksys PCMPC200 - EtherFast 10/100 CardBus PC Card.
- December 26, 2001
- Windows 98/Me/NT/2000
- 436 KB
- Upgrade your Linksys USB100TX - EtherFast 10/100 USB Network Adapter.
- March 22, 2002
- Windows (all)
- 96 KB
- Upgrade your Linksys USBM64M - Instant USB Disk 64MB.
- April 1, 2002
- Windows 98/Me/2000
- 2.1 MB
- Upgrade your Linksys WCF11 - Instant Wireless Network CF Card.
- May 31, 2002
- Windows 98/Me/2000
- 2.3 MB
- Upgrade your Linksys WDT11 - Instant Wireless PCI Adapter.
- May 31, 2002
- Windows 98/Me/NT/2000/XP
- 4.0 MB
- Upgrade your Linksys EG1064 - Instant Gigabit Network Adapter.
- May 18, 2009
- Windows (all)
- 1.4 MB
- Upgrade your Linksys EG1032 - Instant Gigabit Network Adapter.
- December 15, 2004
- Windows (all)
- 2.7 MB
- Upgrade your Linksys PLEBR10 - Instant PowerLine Etherfast 10/100 Bridge.
- November 25, 2002
- Windows (all)
- 3.9 MB
- Upgrade your Linksys PLUSB10 - Instant PowerLine USB Adapter.
- November 25, 2002
- Windows (all)
- 3.9 MB
- Drivers for Linksys WPG11 - Wireless Presentation Gateway.
- March 17, 2003
- Windows (all)
- 3.3 MB
- Linksys BEFCMU10 EtherFast Cable Modem with USB and Ethernet Connection Driver v 2.
- December 7, 2007
- Windows XP/Vista/7
- 73 KB
- November 3, 2008
- Windows XP/Vista
- 148 KB
- August 13, 2009
- Windows (all)
- 4.7 MB
- September 2, 2009
- Windows (all)
- 492.0 MB
- August 12, 2011
- Windows (all)
- 6.0 MB
- October 7, 2009
- Windows XP/Vista
- 41.9 MB
- December 8, 2011
- Mac OS X
- 1.7 MB
- March 9, 2012
- Windows (all)
- 1.7 MB
- Upgrade your Linksys WCF12 - Wireless CompactFlash Card Driver v 2.
- September 16, 2002
- Windows (all)
- 2.0 MB