Sudo./PkgCreate.py -v 7.0 -p evansport -c r8152 -min-sdk 7.0. Extract the resulting SPK file as a zip and extract the r8152.ko file. Put it on the synology and use insmod to load the module. Enable interface with: ifconfig eth1 up. Yay USB 2.5Gbit ethernet working on DSM 7.0 Beta. No downgrade needed. Synology DS StationHow to eject external device on Synology DS Station. Synology recommends you use a USB 2.0 port. With certain dongles, it's even possible to configure the Synology DS218+ into an access point and have other devices connect to it directly. The VirtualHere USB Server software runs on the Synology, QNAP, ASUSTOR, ReadyNAS and MyCloud NAS Devices, as well as Raspberry Pi, AMD64, x86, MIPS, ARM, PowerPC, ARM64 etc running ANY version of Linux, and now runs on OSX, Android and Windows. As you also can see from the dmesg output, it finds the device during boot 28.071704 usb 1-1: new high-speed USB device number 2 using xhci-hcd but then nothing happens. Which means that the kernel modules are missing (not only the firmware, which you installed). You can verify that by looking at the configuration of the Synology kernel.
All I/O modules and IP Speakers supported on Surveillance Station are listed in the menu below. You might need to upgrade Device Pack to enhance the compatibility with Surveillance Station. For the maximum device support number of each DiskStation model, please refer to the specifications on our Product Comparison Page.
Suggest Device
I/O Module
Advantech
| Device Name | Digital Input Number | Digital Output Number | Audio I/O | Audio Detection | Network Time Server | Version | Note |
|---|
| ADAM-6050 | 12 | 6 | Device Pack 3.7-0890 |
| ADAM-6051 | 12 | 2 | Device Pack 5.5.0-2432 |
| ADAM-6052 | 8 | 8 | Device Pack 3.7-0890 |
| ADAM-6060 | 6 | 6 | Device Pack 4.3.0-1313 |
| ADAM-6066 | 6 | 6 | Device Pack 4.3.0-1313 |
| ADAM-6250 | 8 | 7 | Device Pack 3.7-0890 |
| ADAM-6266 | 4 | 4 | Device Pack 4.0.0-1230 |
| WISE-4010 | 4 | 4 | Device Pack 5.5.0-2432 |
| WISE-4050 | 4 | 4 | Device Pack 5.5.0-2432 |
| WISE-4060 | 4 | 4 | Device Pack 5.5.0-2432 |
Axis
| Device Name | Digital Input Number | Digital Output Number | Audio I/O | Audio Detection | Network Time Server | Version | Note |
|---|
| P8221 | 4 | 4 | Device Pack 3.7-0890 | Show |
- Switching between digital input and output is not supported yet.
|
| A9161 | 6 | 1 | Device Pack 5.1-2107 | Show |
- Switching between digital input and output is not supported yet.
|
| A9188 | 8 | 8 | Device Pack 5.1-2107 | Show |
- Switching between digital input and output is not supported yet.
|
Chiyu
| Device Name | Digital Input Number | Digital Output Number | Audio I/O | Audio Detection | Network Time Server | Version | Note |
|---|
| BF-1010 | 10 | 10 | Device Pack 5.8.1-3056 |
Synology Nas External Usb Drive
Hybrex
| Device Name | Digital Input Number | Digital Output Number | Audio I/O | Audio Detection | Network Time Server | Version | Note |
|---|
| IP8100 | 8 | 4 | Device Pack 5.7.3-2740 | Show |
- The current state of digital output is not supported.
|
Connect Usb Drive To Synology
IP Speaker
Synology USB Devices Driver
Axis
| Device Name | Audio Codec | Audio In/Out | Network Time Server | Version | Note |
|---|
| C1004-E | AAC, G726, G711 | In/Out | Device Pack 5.7.0-2635 |
| C2005 | AAC, G726, G711 | In/Out | Device Pack 5.7.0-2635 |
| C3003-E | AAC, G726, G711 | In/Out | Device Pack 5.7.0-2635 |